Published at Thursday, May 31st, 2018 - 14:52:55 PM. . By Bexley Barth.
A dumb waiter saves your back, and with advancing age this is solid medical advice! Industrial strength insulation is essential, even for below ground cellars. The standard material used is four to six inch thick polystyrene or polyurethane sheets, aluminum clad on both sides. Insulate all six surfaces, meaning four walls, ceiling and floor, even if your cellar rests on solid earth. The cold room contractor who advises that it is not necessary to insulate the floor because it rests on solid earth does not know what he is talking about and should be avoided. Heat absorbed by the ground during the day goes through the earth and rises through the floor.
Ridged Foam and Fiberglass insulation are normally used in cellar construction. It is very important that all walls and ceilings be insulated. This will ensure that the temperature will remain constant and not be affected by the outside elements. If the floor is concrete apply a sealer before applying the finish flooring. This will prevent any moisture from transmitting from the ground. This moisture will rot wood and keep mastic, used to apply tile and linoleum, from setting properly.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.