Published at Thursday, May 31st, 2018 - 10:09:02 AM. . By Bexley Barth.
Wine Racks and Case Storage: Avoid fluorescent illumination which ruins wine. Standard lighting is the regulation required moisture proof bulkhead lighting using normal LED lamps. Adequate lighting helps to locate bottles. Some form of racking and shelving is needed. The choice is very personal, and depends on whether it is a showcase type or a working cellar. There are designer built racks of hard wood which will provide an impressive display but are very expensive. The alternative is a mix of bins, rectangular, square or diamond shaped (recommended), and single bottle racks, with additional below counter level shelves for unbroken casesboxes.
Wooden Rack Wine Cellar: Additionally, cold goes through the floor, spreads through the earth, and could cause condensation on adjoining house walls. If your cellar is on an upper floor, insulation of the floor is mandatory to avoid condensation on the ceiling of the room below, which if it is your neighbors could lead to very unpleasant relations especially if his ceiling plaster gives way. Similar considerations apply to insulation of the ceiling in cellars built within apartments. For upper floor cellars, check the floor loading factor. Domestic apartments are not built to take very heavy loads. A case of wine weighs 40-45 pounds. A six case high stack means a load of over 220 pounds on an area about one square foot. On 10 square feet you can pile 9 or 10 such stacks! Whether it is you or your neighbor below, structural cracks are not desirable.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2019 Beer Hyped. All Rights Reserved.