Published at Thursday, May 31st, 2018 - 03:02:36 AM. . By Janelle Orlando.
Wooden Rack Wine Cellar: Additionally, cold goes through the floor, spreads through the earth, and could cause condensation on adjoining house walls. If your cellar is on an upper floor, insulation of the floor is mandatory to avoid condensation on the ceiling of the room below, which if it is your neighbors could lead to very unpleasant relations especially if his ceiling plaster gives way. Similar considerations apply to insulation of the ceiling in cellars built within apartments. For upper floor cellars, check the floor loading factor. Domestic apartments are not built to take very heavy loads. A case of wine weighs 40-45 pounds. A six case high stack means a load of over 220 pounds on an area about one square foot. On 10 square feet you can pile 9 or 10 such stacks! Whether it is you or your neighbor below, structural cracks are not desirable.
The general rule when building is, the thicker the walls the better the insulation factor, the better the cellar maintains a consistent temperature. A vapor barrier and insulation is required. 6-mil plastic sheeting should be applied to the hot side of the cellar walls & ceiling. If it is impossible to apply to the outside walls then apply the vapor barrier from within the cellar. Wrap the entire cellar, walls and ceilings, in plastic, leaving it loose in-between the stud cavity so the insulation can be placed easily. Recommended MINIMUM R Factor: Walls: R 11 Ceilings: R 19
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.