Published at Thursday, May 31st, 2018 - 17:55:04 PM. . By Mariam Dinh.
The Wine Room: Before installing a wine refrigeration system, make sure the room is vapor sealed and properly insulated. Every wall and ceiling should be scaled with a vapor barrier on the "warm side" of the walls. 6 or 8 mil plastic sheeting is highly recommended. Interior walls should be insulated to a minimum of R-19. We recommend using rigid foam board. Additionally, all cracks should be filled with expanding spray foam. All walls are finished with moisture resistant green board.
Split Cooling versus Self-Contained Cooling: Self-contained systems are less expensive and simple to install but possible downsides include the noise it produces during normal operation and a shorter life span (around 5 to 6 years) compared to a split cooling system. The availability of a suitable adjacent room for ventilation can also be a factor but this could be solved by using air ducts to control where the warm air can be vented. One such wine cellar cooling system that uses this method is the Cellarmate Self-Contained System. Of course, there will be additional costs depending on the circumstances surrounding the installation.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.