Published at Thursday, May 31st, 2018 - 18:01:31 PM. . By Danica Brunner.
However, much like wine racks and wine refrigerators, it is extremely important to measure and plan extensively before you break ground on this project. Many of the rules that you should consider when building a wine rack or purchasing a wine refrigerator still apply when building your own wine cellar, but there are more considerations as well. Because wine cellars are typically meant for large-scale wine storage and aging, be sure that your cellar is sufficiently insulated and protected from the elements.
For flooring, cover the insulation panels with plain wood (plywood), preferably overlaid with a thick synthetic carpet which can cushion dropped bottles and minimise breakage. The optimum cooling equipment is not domestic air conditioners but industrial refrigerating compressors, situated outside the houseapartment and connected to evaporators in the cellar, which are best mounted on the ceiling to save wall space for the racking. It is better to provide over rather than under capacity of cooling because it imposes less strain on the compressor. And insist on high quality equipment, especially the controlling thermostat. A faulty thermostat could cause the compressor to operate non-stop, leading to temperatures of 50 degrees fahrenheit or more below zero, with absolutely disastrous and irretrievable consequences to your wine. Provision of an alarm set to go off if the temperature goes beyond preset minimum and maximum temperatures is essential.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2019 Beer Hyped. All Rights Reserved.