Published at Thursday, May 31st, 2018 - 01:31:00 AM. . By Leah Brunet.
Wooden Rack Wine Cellar: Additionally, cold goes through the floor, spreads through the earth, and could cause condensation on adjoining house walls. If your cellar is on an upper floor, insulation of the floor is mandatory to avoid condensation on the ceiling of the room below, which if it is your neighbors could lead to very unpleasant relations especially if his ceiling plaster gives way. Similar considerations apply to insulation of the ceiling in cellars built within apartments. For upper floor cellars, check the floor loading factor. Domestic apartments are not built to take very heavy loads. A case of wine weighs 40-45 pounds. A six case high stack means a load of over 220 pounds on an area about one square foot. On 10 square feet you can pile 9 or 10 such stacks! Whether it is you or your neighbor below, structural cracks are not desirable.
This also means that you should measure the bottles you plan to keep. Keep in mind that the average 750 milliliter bottle of wine is approximately 3-4 inches wide and roughly 12 inches tall. However, wine bottles come in a variety of sizes, so consider any exceptions to this measurement that you purchase frequently or would like to store. So, if you had roughly 20 bottles of wine that you wanted to store, consider storing them in a rectangle: 4 bottles by 5 bottles. If you allow 5 square inches for each bottle (including the dividing woodmetal), that would give you an area of roughly 20 inches by 25 inches. You can use this as a guideline when designing your home wine rack.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.