Published at Thursday, May 31st, 2018 - 20:27:14 PM. . By Serena Tomlin.
Wall, Ceiling & Floor Coverings: What type of finishing materials should be used? There are certain ones not to use, but what it really comes down to is a matter of taste and budget. The cellar usually has a decor theme that is carried throughout the interior. The walls and ceilings are often covered with drywall and then plastered or painted (when painting only use a latex covering). If drywall is used we recommend that a waterproof drywall be used for added protection. Cedar, Redwood and other wood coverings can be applied to the walls and ceiling, usually in a tongue and grove application. This can provide a uniform look to the cellar especially when the racking material is the same wood as the wall and ceiling coverings. Stone, granite or even ceramic tiles can be used as wall covering material.
A dumb waiter saves your back, and with advancing age this is solid medical advice! Industrial strength insulation is essential, even for below ground cellars. The standard material used is four to six inch thick polystyrene or polyurethane sheets, aluminum clad on both sides. Insulate all six surfaces, meaning four walls, ceiling and floor, even if your cellar rests on solid earth. The cold room contractor who advises that it is not necessary to insulate the floor because it rests on solid earth does not know what he is talking about and should be avoided. Heat absorbed by the ground during the day goes through the earth and rises through the floor.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.