Published at Thursday, May 31st, 2018 - 21:43:33 PM. . By Lyla Maier.
Doors should be solid wood andor insulated and weather stripping is vital for an air tight seal.Glass should be double pane with a minimum of a 12" gap. Lighting should be low wattage. The Wine Cellar Refrigeration Units Wine cellar refrigeration unit types and models are usually chosen based on room size, which is usually measured in cubic feet (Length x Width x Height). Other factors to consider are the location of your wine room and the geographical aspects of your home because they can affect the temperature and humidity of your wine room. Measure the size of the room then use a thermometer and hygrometer to test the room's natural temperature and humidity.
The Wine Room: Before installing a wine refrigeration system, make sure the room is vapor sealed and properly insulated. Every wall and ceiling should be scaled with a vapor barrier on the "warm side" of the walls. 6 or 8 mil plastic sheeting is highly recommended. Interior walls should be insulated to a minimum of R-19. We recommend using rigid foam board. Additionally, all cracks should be filled with expanding spray foam. All walls are finished with moisture resistant green board.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.