Published at Thursday, May 31st, 2018 - 21:54:08 PM. . By Lyla Maier.
The second type is the Split Cooling System. This type of wine cellar cooling unit is essentially two separate units, the condenser unit and the evaporator unit. The condenser, which is usually situated outside the house, supplies refrigerant liquid to the evaporator via a compressor, which is normally wall mounted inside the wine room. The evaporator then cools the air that comes into contact with it by turning humid air into liquid, which is then collected outside the wine room.
Split systems come in handy when dealing with site difficulties or when installation flexibility is needed. On the other hand his wine cellar cooling unit costs more than self-contained ones and requires an HVAC professional to install it. Ideally, the two units must be at least 50 feet apart, which in most cases means that the condenser unit might have to be located outside the house. This means extra costs for the condenser housing, pipelining sets and power source.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.