Published at Thursday, May 31st, 2018 - 20:46:13 PM. . By Michaela Sorenson.
A dumb waiter saves your back, and with advancing age this is solid medical advice! Industrial strength insulation is essential, even for below ground cellars. The standard material used is four to six inch thick polystyrene or polyurethane sheets, aluminum clad on both sides. Insulate all six surfaces, meaning four walls, ceiling and floor, even if your cellar rests on solid earth. The cold room contractor who advises that it is not necessary to insulate the floor because it rests on solid earth does not know what he is talking about and should be avoided. Heat absorbed by the ground during the day goes through the earth and rises through the floor.
Wooden Rack Wine Cellar: Additionally, cold goes through the floor, spreads through the earth, and could cause condensation on adjoining house walls. If your cellar is on an upper floor, insulation of the floor is mandatory to avoid condensation on the ceiling of the room below, which if it is your neighbors could lead to very unpleasant relations especially if his ceiling plaster gives way. Similar considerations apply to insulation of the ceiling in cellars built within apartments. For upper floor cellars, check the floor loading factor. Domestic apartments are not built to take very heavy loads. A case of wine weighs 40-45 pounds. A six case high stack means a load of over 220 pounds on an area about one square foot. On 10 square feet you can pile 9 or 10 such stacks! Whether it is you or your neighbor below, structural cracks are not desirable.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.