Published at Thursday, May 31st, 2018 - 00:00:00 AM. . By Lou Arriaga.
The Wine Room: Before installing a wine refrigeration system, make sure the room is vapor sealed and properly insulated. Every wall and ceiling should be scaled with a vapor barrier on the "warm side" of the walls. 6 or 8 mil plastic sheeting is highly recommended. Interior walls should be insulated to a minimum of R-19. We recommend using rigid foam board. Additionally, all cracks should be filled with expanding spray foam. All walls are finished with moisture resistant green board.
Split systems come in handy when dealing with site difficulties or when installation flexibility is needed. On the other hand his wine cellar cooling unit costs more than self-contained ones and requires an HVAC professional to install it. Ideally, the two units must be at least 50 feet apart, which in most cases means that the condenser unit might have to be located outside the house. This means extra costs for the condenser housing, pipelining sets and power source.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.