Published at Thursday, May 31st, 2018 - 02:41:40 AM. . By Davina Barkley.
The general rule when building is, the thicker the walls the better the insulation factor, the better the cellar maintains a consistent temperature. A vapor barrier and insulation is required. 6-mil plastic sheeting should be applied to the hot side of the cellar walls & ceiling. If it is impossible to apply to the outside walls then apply the vapor barrier from within the cellar. Wrap the entire cellar, walls and ceilings, in plastic, leaving it loose in-between the stud cavity so the insulation can be placed easily. Recommended MINIMUM R Factor: Walls: R 11 Ceilings: R 19
Lighting becomes a very important part of the decor. The possibilities are endless, but make sure the lighting is air locked or of exterior grade. Use sufficient lighting to make an enjoyable atmosphere and one that is possible to see in. While it is true that leaving your lights on for long periods will have an impact on the temperature, for short periods it will not. Install a timer light to avoid leaving the lights on by accident when you leave the cellar.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.