Published at Wednesday, May 30th, 2018 - 20:59:36 PM. . By Heather Chow.
Split System; Ductless split systems, which keep the condensing unit and fan coils separate, were made for cellars where proper ventilation is not directly available. The evaporator coil part of the unit will still be located inside the cellar with your wine. However, the compressor, fan, and coil of the cooling unit will be located outside, or perhaps in an adjoining room to your wine cellar. This is to help provide the cooling unit with a proper amount of ventilation. A kind of flexible hose or refrigeration line will connect the exterior unit to the interior one.
The Wine Room: Before installing a wine refrigeration system, make sure the room is vapor sealed and properly insulated. Every wall and ceiling should be scaled with a vapor barrier on the "warm side" of the walls. 6 or 8 mil plastic sheeting is highly recommended. Interior walls should be insulated to a minimum of R-19. We recommend using rigid foam board. Additionally, all cracks should be filled with expanding spray foam. All walls are finished with moisture resistant green board.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2019 Beer Hyped. All Rights Reserved.