Published at Thursday, May 31st, 2018 - 18:21:41 PM. . By Paige Talbert.
The Wine Room: Before installing a wine refrigeration system, make sure the room is vapor sealed and properly insulated. Every wall and ceiling should be scaled with a vapor barrier on the "warm side" of the walls. 6 or 8 mil plastic sheeting is highly recommended. Interior walls should be insulated to a minimum of R-19. We recommend using rigid foam board. Additionally, all cracks should be filled with expanding spray foam. All walls are finished with moisture resistant green board.
The second type is the Split Cooling System. This type of wine cellar cooling unit is essentially two separate units, the condenser unit and the evaporator unit. The condenser, which is usually situated outside the house, supplies refrigerant liquid to the evaporator via a compressor, which is normally wall mounted inside the wine room. The evaporator then cools the air that comes into contact with it by turning humid air into liquid, which is then collected outside the wine room.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.