By Paige Talbert. Wine Cellar Types. Published at Thursday, May 31st, 2018 - 06:02:40 AM.
Ridged Foam and Fiberglass insulation are normally used in cellar construction. It is very important that all walls and ceilings be insulated. This will ensure that the temperature will remain constant and not be affected by the outside elements. If the floor is concrete apply a sealer before applying the finish flooring. This will prevent any moisture from transmitting from the ground. This moisture will rot wood and keep mastic, used to apply tile and linoleum, from setting properly.
Passive cellars, rooms that are built below grade, rely on the ground temperature to cool them, and no cooling system may be required. Make sure that the cellar will retain a constant temperature between 52 and 58 degrees; otherwise a cooling unit will be required. Racking There are many types of wood racking in different shapes and sizes. Most popular are the redwood and solid pine racking. Powder coated enamel racking is functional and easy to install. The racking designs are endless.
Your wine cellar is more than just a storage solution, it’s a room where your collection can be displayed in all its glory, which is why lighting plays a big part in the overall décor. We’d recommend installing low-voltage or LED lights, as these will give off the least amount of heat. Using bold bright lighting can risk damaging the wine, so opt for a lighting solution that allows you to read the labels clearly without causing too hot an environment. It’s a good idea to install set timers and motion sensors in the cellar to make sure lights are only on when necessary. If lights are left on for long periods, this could heat up the cellar and put all your efforts to waste. Recessed lighting and sconces can provide fairly subtle, yet effective lighting solutions.
This also means that you should measure the bottles you plan to keep. Keep in mind that the average 750 milliliter bottle of wine is approximately 3-4 inches wide and roughly 12 inches tall. However, wine bottles come in a variety of sizes, so consider any exceptions to this measurement that you purchase frequently or would like to store. So, if you had roughly 20 bottles of wine that you wanted to store, consider storing them in a rectangle: 4 bottles by 5 bottles. If you allow 5 square inches for each bottle (including the dividing woodmetal), that would give you an area of roughly 20 inches by 25 inches. You can use this as a guideline when designing your home wine rack.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2019 Beer Hyped. All Rights Reserved.