Published at Thursday, May 31st, 2018 - 05:15:05 AM. . By Lou Arriaga.
The general rule when building is, the thicker the walls the better the insulation factor, the better the cellar maintains a consistent temperature. A vapor barrier and insulation is required. 6-mil plastic sheeting should be applied to the hot side of the cellar walls & ceiling. If it is impossible to apply to the outside walls then apply the vapor barrier from within the cellar. Wrap the entire cellar, walls and ceilings, in plastic, leaving it loose in-between the stud cavity so the insulation can be placed easily. Recommended MINIMUM R Factor: Walls: R 11 Ceilings: R 19
Cooling Systems: If environmental cooling systems are required Winecave can assist in the application. There are two types of units used to control temperature and humidity in a wine cellar. One is a self contained "through the wall" system, which can handle cellar space up to 1500 cubic feet. The other is a "split system", which is comprised of a condenser located outside the cellar, and an evaporator and thermostat located inside the cellar. For large cellars there are Split Systems that require commercial refrigeration installation.
Any content, trademark’s, or other material that might be found on the Beer Hyped website that is not Beer Hyped’s property remains the copyright of its respective owner/s. In no way does Beer Hyped claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Beer Hyped. All Rights Reserved.